Products

Products

Location:Home--Products

  • Big Wave Corrugating Machine

    Big Wave Corrugating Machine

    This product is widely used in many kinds of industrial factory, civilian buildings, and wall board for attached part product. It has advantage of pretty appearance, durable using and so on. It

  • Roofing Forming Machine

    Roofing Forming Machine

    ROLL FORMING MACHINE FOR ROOF/WALL PANEL Machine are designed as per customer profile drawing requirements, we also provide profile adjustment to achieve reasonable function. Normal Machine Componen

  • Barrel Corrugated Machine

    Barrel Corrugated Machine

    1. Profile Drawing   2. Technical Data  Type: This machine will be used for corrugating the sheared strip.  Sheet Width:762mm  Sheet Length: Max 3600mm  Sheet Thickness:

  • Floor Decking Machine

    Floor Decking Machine

    1) Standard:JISG3312,EN10142,ASTMA653 2) Thick 0.7--1.5mm 3) shining spangle,high strength    GOODS DETAILS AS BELOWS:   1) rib height — pitch — width after corrug

  • Double sides Top Hat

    Double sides Top Hat

    Double sides Top Hat One roll forming machine have two sides roll forming toolings that can produce two different pattern top hat profiles. Two profiles share one driven motor, every time only one s

  • Dual Level MC

    Dual Level MC

    Machine Components 10Ton*1500mm Hydraulic un-coiler with coil car Hydraulic system to expand coil inner hole, Pump motor: 2.2KW Taper wedge expand type Double level expanding palms with two coil

  • Big Wave Decking Machine

    Big Wave Decking Machine

    The panel produced by this floor deck roll forming machine has high strength with big wave. It adheres well to concrete. It is used on high buildings. It not only saves steel mold plate, but also save

  • Span Deck Roofing

    Span Deck Roofing

        This span deck roofing machine consist of belw parts:    5Ton*1250mm Hydraulic un-coiler Hydraulic system expand coil inner hole, Pump motor: 3KW Frequency Inverter to re

  • Box Beam Forming Machine

    Box Beam Forming Machine

    Composition: 5Ton Hydraulic decoiler feeding & leveling device pre-punching system roll forming machine hydraulic cutting system run out table Crimping and fixing interlock se

  • Crimping Curver

    Crimping Curver

    AUTO CRIMPING CURVER MACHINE Machine Parameter: Auto feeding, equipped with Encoder, Servo motor: 1000W Servo frequency control, feeding speed: 2-3 meter/min Control the spacing of tooth crimp a

  • Corrugated Forming Machine

    Corrugated Forming Machine

      Technical Parameters The Chart of Process Flow Decoiling-- feeding--roll forming--measuring length--cutting to length--output   Compositions: Undoiler, main forming machine, hydrauli

  • Lock Seam Machine

    Lock Seam Machine

     Lock Seam Machine Material:     0.4mm Minimum Thickness, 0.7mm Maximum Thickness                    The 0.5mm thickness raw m

  • 864 Small Corrugated Machine

    864 Small Corrugated Machine

     864 Small Corrugated Machine     Smooth Curving Machine

  • Downpipe Forming Machine

    Downpipe Forming Machine

    Downpipe Forming Machine Available material thickness: 0.42~0.8mm Line forming speed: 12m/min, PLC automatically control system Round and Square two shapes for selections. Size can be customize des

  • Glazed Tile Roof Machine

    Glazed Tile Roof Machine

     Glazed Tile Roof Machine Workable thickness range: 0.35~0.8mm, Yield strength 250Mpa Two functions: straight roofing production and tile roof with steps Drawing length adjustable, one stair d

  • C Purlin Machine

    C Purlin Machine

     C150 PURLING MACHINE PROFILE: Material:  1.5 mm Minimum Thickness, 2.5mm Maximum Thickness                  The 2.5 mm thickness raw ma

  • Special Track Machine

    Special Track Machine

     Special Track Forming Machine Track end with notching and split. Thickness 0.8~2.0mm     Safety machine cover interlock electric system. During production if open the mesh c

  • Duplex Ribbing Line

    Duplex Ribbing Line

    This ribbling line are popular used as part of sandwich panel production line, the width of panel are adjustable and machine can make into both pre-cutting and post cutting design. If adopt post-cutti

  • Normal Speed Full Auto C&Z

    Normal Speed Full Auto C&Z

    FULL AUTOMATIC C/Z INTERCHANGABLE MACHINE   The full automatical C/Z interchangeable purlin machine is one of the high standard machinery of Reliance M&N Industries Limited.This production

  • Auto C Purlin Machine

    Auto C Purlin Machine

      FULL AUTOMATIC C80-300 MACHINE   Size change: The form tooling is unclamped, slid into the correct position by PLC control. No special tools, no spacer changed. Infinite sizes are possi

  • High Speed Full Auto C&Z

    High Speed Full Auto C&Z

    FULL AUTOMATIC C/Z INTERCHANGABLE MACHINE The full automatical C/Z interchangeable purlin machine is one of the high standard machinery of Reliance M&N Industries Limited.This production line&n

  • ZX610

    ZX610

      1. Size: 9300mmx2270mmx2400mm                          &nb

  • ZX305

    ZX305

      Brief parameters: 1. Size: 10400mmx2050mmx2000mm                  2. Total Weight: About 9000kg 

  • ZX-120W(MCBM)

    ZX-120W(MCBM)

        Brief parameters: Size: 10800*2200*2250 Total Weight:13Ton Controlling System: PLC+ Servo Control System +Touch Screen+ Frequency Converter Main Power:14.0kw Forming Power:5.0

  • Professional Slitting Line

    Professional Slitting Line

    I. General Introduction Slitting line can do uncoiling, slitting and recoiling works, make coil steel to any needed width coil steel. It mainly includes coil car, uncoiler, coil guide, slitting machi

  • Simple Slitting Line

    Simple Slitting Line

    Simple Slitting/shearing/Recoiling Line /0.8-2.5MM   Material: Max. Coil Width 1250mm; Thickness Range: 0.8-2.5mm                &nb

  • Baby Recoiling Line

    Baby Recoiling Line

    This baby recoiling line is designed and manufacturering as per clients' particular requirements. We fix out the best commercial way to achieve the self-pocessing in normal factory usage. We looking f

  • Hydraulic Folding&Slitting Machine

    Hydraulic Folding&Slitting Machine

    The folding machine can bend different kinds of section by manual operation. Slitting wheels equiped for convenient operation. The length 4 meters and 6 meters for selection.   Machin

  • Simple Cut to Length Line

    Simple Cut to Length Line

    This simple Cut to Length Line can use to shearing, slitting coils as per PLC control system. Smart design and commercial way to achieve normal factory steel processing usage.   Material workin

  • Simple Press Brake

    Simple Press Brake

    4 Meter Simple Press Brake Simple press brake easy operate and maintance. Floor pedal control pressing.  Bending material thickness: 0.3~2mm Throat depth: 300mm Machine overall dimensions: 40

  • Tube Mill Machinery

    Tube Mill Machinery

    I. Introduction of tube mill  Solid state high-frequency tube production line is designed to produce welded pipes as well as square and rectangular pipes and formed sections of the corresponding

  • Aluminium Embossing Line

    Aluminium Embossing Line

      Machine Composition: LK-S1400 type embossing machine   Overall dimensions:3300×1200×1500mm embossing roller size:400×1400mm Embossing pattern:diam

| Total:47Article record  Page:1/2  Page:32Record      1 [2]

Copyright © 2012-2020  XIAMEN RELIANCE M&N MACHINERY INDUSTRIES CO.,LTD   All Rights Reserved.              China Reliable Machinery Manufacturer