Products

Location:Home--Products

C Purlin Machine

 C150 PURLING MACHINE

PROFILE:

Material:  1.5 mm Minimum Thickness, 2.5mm Maximum Thickness
                 The 2.5 mm thickness raw material for inspection, in common use
                 Ex Cold Rolled Coil, Galvanized Coil, 350-450Mpa

Machine Components
3Ton*500mm un-powered uncoiler
Load capacity=MAX.3 Ton; Coiler Width=Max. 500 mm
Coil Inner – diameter =508±30 mm
 
Pre-Leveling Device
The In-feed Section of the machine allows for variations in sheet width
Pre-Level Device with 4 over 3 shafts to remove the Coil-set
 
Cold Rolling Mills
The feeding section with guide;
Gear/Sprocket driving, 14-step to form
Rollers manufactured from Gcr15, CNC lathes, Heat Treatment(HRC58-60), hard Chrome Coated.
Shaft Diameter=Φ75mm, Precision Machined
Main Motor=15KW
Forming speed approx. 15-18m/min
 

Hydraulic Punching & Cutting device
Stop to Punch, Stop to Cut, Post Cut, no slug
Double Holes/Punch on bottom side
Pump motor =11KW; Cutting pressure=Max.16Mpa
Cutting tool material:  Cr12, Heat treatment
   

PLC Control System
Control the quantity & punching length & cutting length automatically
Combined with:  PLC(Delta), Inverter(Delta), Touch Screen(Delta), Encoder(Omron), etc
Cut-to-length tolerance≤±2 mm
Control Voltage 24V
 
Product rack  Un-powered, 6 meters length   
         

Other profiles for option:
 

 
 

    top

Copyright © 2012-2020  XIAMEN RELIANCE M&N MACHINERY INDUSTRIES CO.,LTD   All Rights Reserved.              China Reliable Machinery Manufacturer